Audio-Technica AT3035 Large Diaphragm Cardioid Condenser Microphone with Case

The microphone pictured is the actual mic you will receive! 

Designed for critical home/project/professional studio applications and live performance, this 30 Series large-diaphragm side-address cardioid condenser delivers exceptional detail and low noise. With its extended low-frequency response, the AT3035 produces rich, full sound reproduction and handles extremely high sound pressure levels with ease. Tailored for a smooth, natural sound, this mic is a perfect complement for digital recording equipment. 

*for sanitary reasons, microphones are non-returnable*

This is a used microphone and does show some signs of slight use, but has been fully tested and functions as expected. Please take a moment to review our pictures, as they accurately portray the true condition of this mic. 

Features

• Custom-engineered large diaphragm for exceptional detail and low noise
• Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
• High max SPL, wide dynamic range and optimized output level provide unmatched versatility
• Low self-noise (12 dB SPL) – perfectly suited for today's most sophisticated digital recording equipment
• Extended low-frequency response for rich, full sound
• State-of-the-art surface-mount electronics ensure compliance with A-T's stringent consistency and reliability standards
• Custom shock mount provides superior isolation
• Lo-cut switch (80 Hz, 12 dB/octave) and 10 dB pad

Specs

• Element: Fixed-charge back plate, permanently polarized condenser
• Polar Pattern: Cardioid
• Frequency Response: 20-20,000 Hz
• Low Frequency Roll Off: 80 Hz, 12 dB/octave
• Open Circuit Sensitivity: -32 dB (25.1 mV) re 1V at 1 Pa
• Maximum Input Sound Level: 148 dB SPL, 1 kHz at 1% T.H.D.; 158 dB SPL, with 10 dB pad (nominal)
• Noise: 12 dB SPL
• Dynamic Range: 136 dB, 1 kHz at Max SPL
• Signal-to-Noise Ratio: 82 dB, 1 kHz at 1 Pa
• Phantom Power Requirements: 11-52V DC, 3 mA typical
• Switches: Flat, roll-off; 10 dB pad (nominal)
• Weight: 14oz
• Dims: 6.69" (170.0 mm) long, 2.05" (52.0 mm) maximum body diameter
• Output Connector: Integral 3-pin XLRM-type

*For your protection all purchases over $99 will be shipped signature required.