The pedal pictured is the actual pedal you will receive!
Just in on trade!
When used properly, the Hush will wipe out hiss, unwanted feedback and pickup buzz. The Hush pedal delivers 65dB of signal cleanup, while your music signal integrity remains unaffected. In other words, get rid of the noise without altering your tone!
Simply plug the Hush in after distortion boxes, wah-wahs, noisy vintage effects, or other noisy units and turn the Threshold knob until the noise goes away.
Unlike noise "gates" that chop off the end of your notes, or ruin your sustain, the Hush pedal is actually a form of single-ended noise reduction that tracks your signal all the way and pushes the noise floor below the point where your ear can hear the noise. It does not hurt your sustain or chop off the end of your notes. Simply use the Threshold knob to smooth out your signal while wiping out noise.
The Hush is not designed to take the input directly from your guitar without some processing happening between the guitar and the Hush noise reduction. When setup correctly, with your signal going from your preamp and effects, or from your distortion and effects, into the Hush, you will be amazed at how it will clean up the excess noise, including pickup buzz.
The Hush can also be used in your amplifier’s effects loop. However, if you are running multiple effects through this loop, the Hush should always be the last dynamic device in the signal chain, but before digital delays or reverbs.
This is a used pedal and does show some signs of slight use, but has been fully tested and functions as expected. Please take a moment to review our pictures, as they accurately portray the true condition of this pedal.
- Brand: Rocktron
- Actual Weight: 14oz
- Effect Type: Noise Reduction
- Power Supply Included: No
- Input 1: 1/4 Inch
- Output 1: 1/4 Inch
*For your protection all purchases over $99 will be shipped signature required.