The amplifier pictured is the actual amp you will receive!
Just in on trade!
This Fender USA-made Hot Rod DeVille 4x10 is loaded with tone and feel that's balled inside of a stage and studio ready package that has consistently remained un-paralleled since its inception.
Loaded with two 6l6 power tubes and three 12AX7 preamp tubes, this 60 watt 4x10 combo has enough "umpf" to fill the stages of un-mic'd clubs to dual mic'd arenas.... all without losing that unbeatable "cranked to 10" tone that was popularized during the inception of Rock and Roll.
Featuring a dual input, dual channel configuration, Normal or Drive, both with an additional, push button activated/foot-switchable, mode - "Normal" or "Bright" on the Normal channel and "Drive" or "More Drive" on the Drive channel.
Allowing for situational versatility, this amp features Input 1 as a "high output" input, where input 2 is a "low output" input, making it easy to transition from bedroom or studio playing to live concert and full band rehearsals.
Easily switch between channels and modes with the "Channel Select" button and"More Drive" buttons on the control panel or with a foot-switch (not included) - allowing for live action versatility and the ability to seamlessly flow between genre's, add chunkiness to rhythmic riffage or bring your solos to the front when it's time to shine.
Swiftly dial in your perfect tone with the master EQ - Bass, Mid, Treble and channel Volume - then fine tune it all, with the Drive, Reverb, Presence and Master Volume controls.
Pedal Head? Then utilize the control panel's effects loop, allowing for you to run your effects after the preamp, or, if preferred, you can run them out front or mix it up with your dirt pedals out front and your delay and modulation pedals in the effects loop.
The 10" Fender Special Design Eminence speakers have the tight punchiness that is expected of 10" speakers, but, with the quad, also features the fullness and bottom-end bulkiness of 12" speakers - guaranteeing your solos to cut through the mix, while allowing your rhythm riffs to be heard and fill out each song.
* please note - the back panel is not original and has been replaced. This is a used amplifier and does show some signs of slight use, but has been fully tested and functions as expected. Please take a moment to review our pictures, as they accurately portray the true condition of this amp.
Key Features
- Brand: Fender
- Actual Weight: 60lbs 3oz
- Amplifier Type: Tube
- Amplifier Watts: 60W
- Voltage: 120v Before making a purchase outside of the United States, please know that this product uses the standard 120V voltage standard. The Music Farm is not responsible for any damage caused by not adhering to the voltage requirements
- Headphone Connection: No
- Built in Reverb: Yes
- MIDI Connection: No
- USB Connection: No
- Effects Loop: No
- Footswitch I/O: Yes
- Footswitch Included: No
- Input 1 Type: 1/4 Inch
- Input 2 Type: 1/4 Inch
*For your protection all purchases over $99 will be shipped signature required.
The Music Farm is an Authorized Fender Dealer.