The amplifier pictured is the actual amp you will receive!
Just in on trade!
Combining classic tube sound and feel with next-generation tonal diversity, the BOSS Nextone series presents an exciting new concept in professional guitar amplification. Distinctive channel voicings deliver a wide range of inspiring tones, while four selectable Class AB analog power amp types provide instant access to the unique characteristics of 6V6, 6L6, EL84, and EL34 output tube sections. Backed by the advanced Tube Logic approach, each power amp type re-voices the entire circuit from input to output, putting the complete sonic experience of these signature power stages in one amp for the very first time.
Nextone features a dual-channel design with clean and lead channels plus a shared three-band tone stack and presence control. Boost and Tone switches are on hand as well, allowing you to add some extra gain and sparkle if needed. With a quick button press, you can switch the amp into custom mode, which provides factory-tweaked variations of the standard clean and lead channels. Better still, the custom mode channels can be fine-tuned to your liking with the Nextone Editor software.
Via a friendly interface, the Nextone Editor gives you deep editing tools to refine the sound to perfectly match your personal style and favorite pedals. Set a channel’s tone stack to American or British types, shape the overall tone with a powerful channel EQ, and even tweak the playing response by adjusting bias, sag, and more. The Tone switch can be assigned to two different types, and the Boost switch can be set for different characters or even be assigned as a compressor. A system-wide EQ is available too, enabling you to define the tonal balance of the entire amp. And with 99 different user setups available, you’re able to customize Nextone’s sound for every gig you play.
In a tube-based guitar amplifier, the preamp is important for basic tone shaping, but it’s the power amp design that really defines the overall sonic signature and playing feel. Most amps use a specific output tube type, while a rare few allow you to swap out different power tubes. Unfortunately, this process usually requires physical tube replacement and bench time with a tech, making it expensive and inconvenient. For the most part, you really needed to buy multiple amps to access the unique tonal characteristics of different output tube sections…until now.
Nextone changes all this with the ability to instantly re-voice its analog Class AB power amp section with one of the four classic designs. American sounds are represented with 6V6 and 6L6 output tube types, while British sounds are represented with EL84 and EL34 types. Unlike modeling amps, which simply feed pre-cooked amp models through a non-reactive amplifier, selecting a power amp type on the Nextone physically changes the complete output circuitry, as well as the way the preamp and speaker interacts with it. This makes the entire amp perform authentically at each setting, providing realism that’s only possible with the advanced Tube Logic approach.
With any tube amp, you really need to push its output tubes to get it to sing at its best. Unfortunately, this means turning up the volume, which is nearly always frowned upon by sound engineers, bandmates, and neighbors. Driven by Tube Logic, Nextone delivers the complex distortion characteristics of output tubes and their interaction with the output transformer and speaker, providing that rich, dynamically responsive sound we love. And with Nextone’s adjustable power control, you can always experience this cranked-amp tone while matching the volume to any situation, be it home, studio, or stage.
With its built-in delay, reverb, and tremolo effects, Nextone brings even more versatility and convenience to gigging guitarists. Using the Nextone Editor, the delay section in custom mode can be freely assigned to analog, tape, or SDE-3000 delay types or a tremolo effect, while the reverb can be assigned to plate, spring, or hall types. Furthermore, each effect type offers a deep set of parameters for dialing in the perfect tone. The amp also includes a loop for integrating your own effects, with series/parallel operation, loop position, and more selectable via the Nextone Editor.
Connecting with just a single cable, the optional GA-FC foot controller provides a command center for channel selection, Tone, Boost, effects, pedal volume, and more. If you want to travel even lighter, up to three FS-series footswitches can be used to control various functions. There’s also a line out for sending a direct signal to a PA, plus a phones/recording output for silent practice and tracking sessions. Using the Nextone Editor, the character of the direct sound can be set to one of three Air Feel settings for a range of mic’d cab tones.
External speaker jacks are included too, with support for connecting up to two 16-ohm 4x12 cabs for even bigger tones. In addition to providing communication with the Nextone Editor, the amp’s USB jack functions as a direct recording interface for your favorite DAW software. Multiple channels are supported, allowing you to record both a cab-emulated output and a dry direct tone for re-amping later through the Nextone.
This is a used amp and does show some signs of slight use, but has been fully tested and functions as expected. Please take a moment to review our pictures, as they accurately portray the true condition of the amplifier.
Features:
-
Professional performance amplifier with authentic Tube Logic tone
-
Four analog Class AB power amp circuits, selectable from the panel: 6V6, 6L6, EL84, and EL34
-
Streamlined combo design with 40 watts of power and custom 12 inch speaker
-
Clean and lead channels, with standard and custom mode options
-
Dynamically responsive power control for cranked-up sound and response at reduced volumes
-
Nextone Editor (Mac/Windows) for customizing internal amp parameters, including tone stack type, EQ, sag, bias, effects, system settings, and much more
-
Boost and Tone switches for adding crunch and sparkle
-
Built-in delay, tremolo, and reverb effects, plus loop for patching in external effects
-
External speaker jacks: one 8 ohm and two 16 ohm
-
Line, USB, and phones/recording outputs, with three Air Feel mic’d cab settings selectable from the Nextone Editor
- Support for direct recording and re-amping via USB
Key Features
- Brand: Boss
-
Actual Weight: 30lbs 10oz
-
Amplifier Type: Solid State
-
Amplifier Watts: 40W
-
Voltage: 120v Before making a purchase outside of the United States, please know that this product uses the standard 120V voltage standard. The Music Farm is not responsible for any damage caused by not adhering to the voltage requirements
-
Headphone Connection: Yes
-
Built in Reverb: Yes
-
MIDI Connection: No
-
USB Connection: Yes
-
Effects Loop: Yes
-
Footswitch I/O: Yes
-
Footswitch Included: No
-
Input 1 Type: 1/4 Inch
*For your protection all purchases over $99 will be shipped signature required.
The Music Farm is an Authorized BOSS Dealer.